Hours at a glance
Drive, shift and cycle time left on one dial — with a heads-up before your 30-minute break is due.
Daylog ELD keeps every hour of a driver’s day in the log — from first light to last mile. Clear hours, simple duty status and roadside inspections in one tap.
Everything a driver needs on the road, and nothing that gets in the way. Built around one idea: know your hours at a glance.
Drive, shift and cycle time left on one dial — with a heads-up before your 30-minute break is due.
Driving is detected automatically. The screen switches to a large timer and status changes lock until you stop.
One tap opens a read-only officer view of today and the previous 7 days. Send records to FMCSA in seconds.
Fill out driver vehicle inspection reports right from the bottom bar — no paper forms in the cab.
Review your daily logs and handle unidentified driving events assigned to your truck.
Add or switch a co-driver, change trucks mid-shift and read messages from dispatch in one place.
Open the app and the Today screen tells you everything: how long you can still drive, when your shift ends and when the next break is due.
When an officer asks for your logs, everything is one tap away on the Inspect screen.
The DOT instruction sheet, malfunction guide and user manual must stay in the vehicle and be available during inspections — 49 CFR § 395.22(h).
No training day required. Your carrier sets you up, and you’re ready before the first trip.
Open Daylog and enter the driver ID and 6-digit PIN your carrier gave you. Forgot it? Tap “Need help?” to reach dispatch support.
Search by unit, plate or VIN and tap “Start shift”. If your carrier already assigned a truck, this step is skipped.
Keep Bluetooth on. The app pairs with the in-cab device automatically and shows a green “ELD” badge when ready.
Plug the ELD into the truck’s diagnostic port using the connector that matches your vehicle, then pair it in the app. Me › ELD device turns “Connected”.
Where’s the port? Usually under the dashboard, to the left of the steering column.
Heavy-duty diagnostic connector
Legacy heavy-duty connector
Standard on-board diagnostics port
Download, print and keep a copy in every truck. Each guide is also available inside the app.
Step-by-step user manual: sign in, hours, duty status, inspections and more.
DownloadQuick roadside card: let the officer view your logs and transfer records.
DownloadWhat drivers and carriers must do if the ELD stops working.
DownloadFind the diagnostic port, choose the right cable and pair the device.
DownloadTap Inspect in the bottom bar, then Open view, and hand the phone to the officer. The view is read-only and covers today plus the previous 7 days. Keep the phone unlocked.
On the Inspect screen tap Send to FMCSA, choose FMCSA web service (recommended) or email, enter the output file comment the officer gives you and tap Send now. A confirmation appears when the transfer is done.
If the transfer fails, show the read-only view instead, tell the officer and contact your carrier. Failed transfers can be resent once you have signal.
The ELD device connects through a 9-pin J1939 cable (most trucks from 2001 on), a 6-pin J1708 cable (older trucks) or a 16-pin OBD-II cable (light and medium duty).
Note the malfunction and tell your carrier within 24 hours. Rebuild today and the previous 7 days on paper unless those records are still available in the app, and keep logging on paper until the ELD is repaired or replaced.
The carrier must repair or replace the ELD within 8 days of learning about the malfunction (49 CFR § 395.34).
No. Driving is detected automatically, and status changes are locked while the truck is moving. The app shows a large timer so you can keep your eyes on the road, not the clock.
Your driver ID and 6-digit PIN come from your carrier. On the sign-in screen tap Need help? to reach dispatch support.
Download Daylog ELD and sign in with the driver ID and PIN from your carrier.